Quick and simple set up
All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial start up. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyzer is turned on.
|
The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.
Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O2, and stack temperature. Determine combustion efficiency, CO2, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.
|
|
Model
|
Description
|
Additional Info
|
|
708:
|
708: Combustion Efficiency Analyzer
- Measure CO, and temperature
- Calculate CO2, efficiency, excess air, and CO air free
|
Data Sheet
Instruction Manual
Features/Functions
|
|
709:
|
709: Combustion Efficiency Analyzer and Differential Manometer
- All the features of the 708 PLUS high resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
- Measure CO, and temperature
- Calculate CO2, efficiency, excess air, and CO air free
|
Data Sheet
Instruction Manual
Features/Functions
|
709R:
|
709R: Combustion Efficiency Analyzer w/ Differential Manometer
- All the features of the 709 PLUS rechargeable batteries
- Measure CO, and temperature
- Calculate CO2, efficiency, excess air, and CO air free
|
Data Sheet
Instruction Manual
Features/Functions
|
|
712:
|
712: Deluxe combustion efficiency analyzer with optional PC interface
- All the features of the 709R PLUS checks combustibles in flue, optional PC interface
|
Data Sheet
Instruction Manual
Features/Functions
|
|
714:
|
714: Combustionefficiency analyzer with NOX and optional PC capoirlity
- Measure 02, CO, and NOX
- Calculate CO2, NOX, efficiency, excess air
|
Data Sheet
Instruction Manual
Features/Functions
|
|
715:
|
715: High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
Use the optional A784 flow regulator to reduce the flow rate of the gas being sampled to measurable levels on high pressure systems such as gas compression engines. The A784 is included in the 715K3 kit.
|
Data Sheet
Instruction Manual
Features/Functions
|
715K3
|
715K3: Gas Compression Engine Service Kit High CO (above 10,000ppm carbon monoxide) combustion analyzer with built-in differential themometer, differential manometer, and NO measurement & NOX calculation
|
Data Sheet
Instruction Manual
Features/Functions
|
|
